dmesg - Gigabyte NVIDIA GeForce GTX 960
microcode: CPU0 microcode updated early to revision 0x7, date = 2013-08-20
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-18-generic (buildd@lgw01-38) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #22-Ubuntu SMP Fri Nov 6 18:25:50 UTC 2015 (Ubuntu 4.2.0-18.22-generic 4.2.3)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cf7cffff] usable
BIOS-e820: [mem 0x00000000cf7d0000-0x00000000cf7d0fff] ACPI NVS
BIOS-e820: [mem 0x00000000cf7d1000-0x00000000cf7dffff] ACPI data
BIOS-e820: [mem 0x00000000cf7e0000-0x00000000cf7fffff] reserved
BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000042fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. P55A-UD4/P55A-UD4, BIOS F15 09/16/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x430000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CDFFF write-protect
CE000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 0E0000000 mask FE0000000 uncachable
2 base 0D0000000 mask FF0000000 uncachable
3 base 100000000 mask F00000000 write-back
4 base 200000000 mask E00000000 write-back
5 base 300000000 mask F00000000 write-back
6 base 400000000 mask FC0000000 write-back
7 base 430000000 mask FF0000000 uncachable
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3584MB, range: 512MB, type UC
reg 2, base: 3328MB, range: 256MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 12GB, range: 4GB, type WB
reg 6, base: 16GB, range: 1GB, type WB
reg 7, base: 17152MB, range: 256MB, type UC
total RAM covered: 16384M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64K num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 512MB, type WB
reg 6, base: 16896MB, range: 256MB, type WB
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcf7d0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f5880-0x000f588f] mapped at [ffff8800000f5880]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01ff0000, 0x01ff0fff] PGTABLE
BRK [0x01ff1000, 0x01ff1fff] PGTABLE
BRK [0x01ff2000, 0x01ff2fff] PGTABLE
init_memory_mapping: [mem 0x42fe00000-0x42fffffff]
[mem 0x42fe00000-0x42fffffff] page 2M
BRK [0x01ff3000, 0x01ff3fff] PGTABLE
init_memory_mapping: [mem 0x420000000-0x42fdfffff]
[mem 0x420000000-0x42fdfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x41fffffff]
[mem 0x400000000-0x41fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcf7cffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xcf5fffff] page 2M
[mem 0xcf600000-0xcf7cffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 2M
BRK [0x01ff4000, 0x01ff4fff] PGTABLE
BRK [0x01ff5000, 0x01ff5fff] PGTABLE
RAMDISK: [mem 0x33ea4000-0x35f49fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F7260 000014 (v00 GBT )
ACPI: RSDT 0x00000000CF7D1040 000040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 0x00000000CF7D10C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 0x00000000CF7D1180 0053BF (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS 0x00000000CF7D0000 000040
ACPI: HPET 0x00000000CF7D6680 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 0x00000000CF7D6700 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: EUDS 0x00000000CF7D6740 000560 (v01 GBT 00000000 00000000)
ACPI: TAMG 0x00000000CF7D6CA0 000A32 (v01 GBT GBT B0 5455312E BG?? 53450101)
ACPI: APIC 0x00000000CF7D6580 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 0x00000000CF7D7700 00394C (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000042fffffff]
NODE_DATA(0) allocated [mem 0x42ffed000-0x42fff1fff]
[ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041f600000-ffff88042f5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000042fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000cf7cffff]
node 0: [mem 0x0000000100000000-0x000000042fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000042fffffff]
On node 0 totalpages: 4192108
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 13216 pages used for memmap
DMA32 zone: 845776 pages, LIFO batch:31
Normal zone: 52224 pages used for memmap
Normal zone: 3342336 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcf7d0000-0xcf7d0fff]
PM: Registered nosave memory: [mem 0xcf7d1000-0xcf7dffff]
PM: Registered nosave memory: [mem 0xcf7e0000-0xcf7fffff]
PM: Registered nosave memory: [mem 0xcf800000-0xf3ffffff]
PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xcf800000-0xf3ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88042fc00000 s96728 r8192 d30248 u262144
pcpu-alloc: s96728 r8192 d30248 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4126583
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16388996K/16768432K available (8146K kernel code, 1237K rwdata, 3800K rodata, 1460K init, 1292K bss, 379436K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:488 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2797.897 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5595.79 BogoMIPS (lpj=11191588)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81ea4000 - ffffffff81eab000)
ftrace: allocating 30905 entries in 121 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz (fam: 06, model: 1e, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
perf_event_intel: CPU erratum AAJ80 worked around
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
microcode: CPU1 microcode updated early to revision 0x7, date = 2013-08-20
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2
microcode: CPU2 microcode updated early to revision 0x7, date = 2013-08-20
#3
microcode: CPU3 microcode updated early to revision 0x7, date = 2013-08-20
#4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (44766.35 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xcf7d0000-0xcf7d0fff] (4096 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 11:35:12, date: 11/20/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3f]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xcf7f0000-0xfebfffff window]
pci 0000:00:00.0: [8086:d131] type 00 class 0x060000
pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
pci 0000:00:1a.0: [8086:3b3b] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0xff00-0xff1f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:3b3e] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0xfe00-0xfe1f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:3b3f] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0xfd00-0xfd1f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xfbfff000-0xfbfff3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfbff8000-0xfbffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3b36] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xfc00-0xfc1f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:3b37] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xfb00-0xfb1f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:3b38] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xfa00-0xfa1f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:3b39] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0xf900-0xf91f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfbffe000-0xfbffe3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3b02] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf800-0xf807]
pci 0000:00:1f.2: reg 0x14: [io 0xf700-0xf703]
pci 0000:00:1f.2: reg 0x18: [io 0xf600-0xf607]
pci 0000:00:1f.2: reg 0x1c: [io 0xf500-0xf503]
pci 0000:00:1f.2: reg 0x20: [io 0xf400-0xf41f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfbffd000-0xfbffd7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbffc000-0xfbffc0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
pci 0000:01:00.0: [10de:1401] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf9000000-0xf9ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xee000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xdf00-0xdf7f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:01:00.1: [10de:0fba] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfaffc000-0xfaffffff]
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xf9000000-0xfaffffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xce00-0xceff]
pci 0000:02:00.0: reg 0x18: [mem 0xfbaff000-0xfbafffff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xfb8fc000-0xfb8fffff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:1c.0: bridge window [mem 0xfb800000-0xfb8fffff 64bit pref]
pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfb7fe000-0xfb7fffff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [mem 0xfb700000-0xfb7fffff]
pci 0000:04:00.0: [197b:2363] type 00 class 0x010601
pci 0000:04:00.0: reg 0x24: [mem 0xfbefe000-0xfbefffff]
pci 0000:04:00.0: PME# supported from D3hot
pci 0000:04:00.1: [197b:2363] type 00 class 0x010185
pci 0000:04:00.1: reg 0x10: [io 0xbf00-0xbf07]
pci 0000:04:00.1: reg 0x14: [io 0xbe00-0xbe03]
pci 0000:04:00.1: reg 0x18: [io 0xbd00-0xbd07]
pci 0000:04:00.1: reg 0x1c: [io 0xbc00-0xbc03]
pci 0000:04:00.1: reg 0x20: [io 0xbb00-0xbb0f]
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:05:00.0: [1b4b:9128] type 00 class 0x010601
pci 0000:05:00.0: reg 0x10: [io 0xaf00-0xaf07]
pci 0000:05:00.0: reg 0x14: [io 0xae00-0xae03]
pci 0000:05:00.0: reg 0x18: [io 0xad00-0xad07]
pci 0000:05:00.0: reg 0x1c: [io 0xac00-0xac03]
pci 0000:05:00.0: reg 0x20: [io 0xab00-0xab0f]
pci 0000:05:00.0: reg 0x24: [mem 0xfbdff000-0xfbdff7ff]
pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:05:00.0: PME# supported from D3hot
pci 0000:00:1c.5: PCI bridge to [bus 05]
pci 0000:00:1c.5: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [io 0xee00-0xeeff]
pci 0000:06:00.0: reg 0x18: [mem 0xfbbff000-0xfbbfffff 64bit pref]
pci 0000:06:00.0: reg 0x20: [mem 0xfbbf8000-0xfbbfbfff 64bit pref]
pci 0000:06:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 06]
pci 0000:00:1c.6: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.6: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.6: bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref]
pci 0000:07:03.0: [1283:8213] type 00 class 0x010185
pci 0000:07:03.0: reg 0x10: [io 0x9f00-0x9f07]
pci 0000:07:03.0: reg 0x14: [io 0x9e00-0x9e03]
pci 0000:07:03.0: reg 0x18: [io 0x9d00-0x9d07]
pci 0000:07:03.0: reg 0x1c: [io 0x9c00-0x9c03]
pci 0000:07:03.0: reg 0x20: [io 0x9b00-0x9b0f]
pci 0000:07:07.0: [104c:8024] type 00 class 0x0c0010
pci 0000:07:07.0: reg 0x10: [mem 0xfb9ff000-0xfb9ff7ff]
pci 0000:07:07.0: reg 0x14: [mem 0xfb9f8000-0xfb9fbfff]
pci 0000:07:07.0: supports D1 D2
pci 0000:07:07.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:1e.0: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xcf7f0000-0xfebfffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus 3f
PCI: root bus 3f: using default resources
PCI: Probing PCI hardware (bus 3f)
ACPI: \: failed to evaluate _DSM (0x1001)
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f])
pci 0000:3f:00.0: [8086:2c51] type 00 class 0x060000
pci 0000:3f:00.1: [8086:2c81] type 00 class 0x060000
pci 0000:3f:02.0: [8086:2c90] type 00 class 0x060000
pci 0000:3f:02.1: [8086:2c91] type 00 class 0x060000
pci 0000:3f:03.0: [8086:2c98] type 00 class 0x060000
pci 0000:3f:03.1: [8086:2c99] type 00 class 0x060000
pci 0000:3f:03.4: [8086:2c9c] type 00 class 0x060000
pci 0000:3f:04.0: [8086:2ca0] type 00 class 0x060000
pci 0000:3f:04.1: [8086:2ca1] type 00 class 0x060000
pci 0000:3f:04.2: [8086:2ca2] type 00 class 0x060000
pci 0000:3f:04.3: [8086:2ca3] type 00 class 0x060000
pci 0000:3f:05.0: [8086:2ca8] type 00 class 0x060000
pci 0000:3f:05.1: [8086:2ca9] type 00 class 0x060000
pci 0000:3f:05.2: [8086:2caa] type 00 class 0x060000
pci 0000:3f:05.3: [8086:2cab] type 00 class 0x060000
pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
pci_bus 0000:3f: busn_res: can not insert [bus 3f] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f])
PCI: pci_cache_line_size set to 64 bytes
Expanded resource reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xcf7d0000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 24 for MSI
hpet: hpet3 irq 25 for MSI
hpet: hpet4 irq 26 for MSI
hpet: hpet5 irq 27 for MSI
hpet: hpet6 irq 28 for MSI
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: [io 0x0800-0x087f] has been reserved
system 00:00: [io 0x0290-0x0294] has been reserved
system 00:00: [io 0x0880-0x088f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0400-0x047f] could not be reserved
system 00:02: [io 0x0580-0x05ff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [mem 0xf4000000-0xf7ffffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [mem 0x000d6000-0x000d7fff] has been reserved
system 00:04: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:04: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:04: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:04: [mem 0xcf7d0000-0xcf7dffff] could not be reserved
system 00:04: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:04: [mem 0x00100000-0xcf7cffff] could not be reserved
system 00:04: [mem 0xcf7e0000-0xcf7fffff] could not be reserved
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:04: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:04: [mem 0xfff00000-0xffffffff] has been reserved
system 00:04: [mem 0x000e0000-0x000effff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.3: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.3: BAR 15: assigned [mem 0xcf800000-0xcf9fffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xcfa00000-0xcfbfffff 64bit pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xcfc00000-0xcfdfffff 64bit pref]
pci 0000:00:1c.3: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa07ffff pref]
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xf9000000-0xfaffffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:1c.0: bridge window [mem 0xfb800000-0xfb8fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.3: bridge window [mem 0xfb700000-0xfb7fffff]
pci 0000:00:1c.3: bridge window [mem 0xcf800000-0xcf9fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.4: bridge window [mem 0xcfa00000-0xcfbfffff 64bit pref]
pci 0000:05:00.0: BAR 6: assigned [mem 0xfbd00000-0xfbd0ffff pref]
pci 0000:00:1c.5: PCI bridge to [bus 05]
pci 0000:00:1c.5: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.5: bridge window [mem 0xcfc00000-0xcfdfffff 64bit pref]
pci 0000:06:00.0: BAR 6: assigned [mem 0xfbc00000-0xfbc1ffff pref]
pci 0000:00:1c.6: PCI bridge to [bus 06]
pci 0000:00:1c.6: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.6: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.6: bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 07]
pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:1e.0: bridge window [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xcf7f0000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xf9000000-0xfaffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xfba00000-0xfbafffff]
pci_bus 0000:02: resource 2 [mem 0xfb800000-0xfb8fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0xfb700000-0xfb7fffff]
pci_bus 0000:03: resource 2 [mem 0xcf800000-0xcf9fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:04: resource 2 [mem 0xcfa00000-0xcfbfffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:05: resource 2 [mem 0xcfc00000-0xcfdfffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
pci_bus 0000:06: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:06: resource 2 [mem 0xfbb00000-0xfbbfffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:07: resource 1 [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:07: resource 8 [mem 0xcf7f0000-0xfebfffff window]
pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
pci 0000:00:1c.3: enabling device (0006 -> 0007)
pci 0000:04:00.0: async suspend disabled to avoid multi-function power-on ordering issue
pci 0000:04:00.1: async suspend disabled to avoid multi-function power-on ordering issue
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 33432K (ffff880033ea4000 - ffff880035f4a000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcb7d0000-0xcf7d0000] (64MB) mapped at [ffff8800cb7d0000-ffff8800cf7cffff]
microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x7
microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x7
microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x7
microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x7
microcode: CPU4 sig=0x106e5, pf=0x2, revision=0x7
microcode: CPU5 sig=0x106e5, pf=0x2, revision=0x7
microcode: CPU6 sig=0x106e5, pf=0x2, revision=0x7
microcode: CPU7 sig=0x106e5, pf=0x2, revision=0x7
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1448019312.692:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xef000000, mapped to 0xffffc90001c00000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1E
intel_idle: lapic_timer_reliable_states 0x2
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:03:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.2.0-18-generic xhci-hcd
usb usb1: SerialNumber: 0000:03:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.2.0-18-generic xhci-hcd
usb usb2: SerialNumber: 0000:03:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.7: debug port 2
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbfff000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.2.0-18-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.7
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.7: debug port 2
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbffe000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 4.2.0-18-generic ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.7
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 4.2.0-18-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 4.2.0-18-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1a.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 4.2.0-18-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1a.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 4.2.0-18-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: UHCI Host Controller
usb usb9: Manufacturer: Linux 4.2.0-18-generic uhci_hcd
usb usb9: SerialNumber: 0000:00:1d.1
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: UHCI Host Controller
usb usb10: Manufacturer: Linux 4.2.0-18-generic uhci_hcd
usb usb10: SerialNumber: 0000:00:1d.2
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 11
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f900
usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: UHCI Host Controller
usb usb11: Manufacturer: Linux 4.2.0-18-generic uhci_hcd
usb usb11: SerialNumber: 0000:00:1d.3
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 93ad27021225ce1bb4865e4bab1e2b6a5f099429'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 7:728:580
pci_bus 0000:01: hash matches
rtc_cmos 00:01: setting system clock to 2015-11-20 11:35:13 UTC (1448019313)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1460K (ffffffff81d37000 - ffffffff81ea4000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 36K (ffff8800017f7000 - ffff880001800000)
Freeing unused kernel memory: 296K (ffff880001bb6000 - ffff880001c00000)
usb 4-6: new high-speed USB device number 2 using ehci-pci
random: systemd-udevd urandom read with 16 bits of entropy available
pata_jmicron 0000:04:00.1: enabling device (0000 -> 0001)
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
scsi host0: pata_jmicron
r8169 0000:02:00.0 eth0: RTL8168e/8111e at 0xffffc90001b74000, e8:de:27:a8:0c:21, XID 0c200000 IRQ 37
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
scsi host1: pata_jmicron
ata1: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 17
ata2: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 17
r8169 0000:06:00.0 eth1: RTL8168d/8111d at 0xffffc90001b9a000, 6c:f0:49:50:de:1a, XID 083000c0 IRQ 38
r8169 0000:06:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
pata_it8213 0000:07:03.0: version 0.0.3
scsi host2: pata_it8213
scsi host3: pata_it8213
ata3: PATA max UDMA/133 cmd 0x9f00 ctl 0x9e00 bmdma 0x9b00 irq 16
ata4: DUMMY
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems apst
r8169 0000:02:00.0 enp2s0: renamed from eth0
r8169 0000:06:00.0 enp6s0: renamed from eth1
firewire_ohci 0000:07:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
scsi host8: ahci
scsi host9: ahci
ata5: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd100 irq 39
ata6: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd180 irq 39
ata7: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd200 irq 39
ata8: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd280 irq 39
ata9: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd300 irq 39
ata10: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd380 irq 39
ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi host10: ahci
scsi host11: ahci
ata11: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe100 irq 16
ata12: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe180 irq 16
ahci 0000:05:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:05:00.0: flags: 64bit ncq pio
scsi host12: ahci
scsi host13: ahci
scsi host14: ahci
scsi host15: ahci
scsi host16: ahci
scsi host17: ahci
scsi host18: ahci
scsi host19: ahci
ata13: SATA max UDMA/133 abar m2048@0xfbdff000 port 0xfbdff100 irq 40
ata14: SATA max UDMA/133 abar m2048@0xfbdff000 port 0xfbdff180 irq 40
ata15: SATA max UDMA/133 abar m2048@0xfbdff000 port 0xfbdff200 irq 40
ata16: SATA max UDMA/133 abar m2048@0xfbdff000 port 0xfbdff280 irq 40
ata17: SATA max UDMA/133 abar m2048@0xfbdff000 port 0xfbdff300 irq 40
ata18: SATA max UDMA/133 abar m2048@0xfbdff000 port 0xfbdff380 irq 40
ata19: SATA max UDMA/133 abar m2048@0xfbdff000 port 0xfbdff400 irq 40
ata20: SATA max UDMA/133 abar m2048@0xfbdff000 port 0xfbdff480 irq 40
usb 5-1: new full-speed USB device number 2 using uhci_hcd
ata3.00: ATAPI: ASUS DVD-E616A2, 1.02, max UDMA/100
ata3.00: configured for UDMA/100
usb 5-1: New USB device found, idVendor=046d, idProduct=c07d
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1: Product: Gaming Mouse G502
usb 5-1: Manufacturer: Logitech
usb 5-1: SerialNumber: 0F77346D3736
tsc: Refined TSC clocksource calibration: 2798.011 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2854e9eaae1, max_idle_ns: 440795264633 ns
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
scsi 2:0:0:0: CD-ROM ASUS DVD-E616A2 1.02 PQ: 0 ANSI: 5
input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1:1.0/0003:046D:C07D.0001/input/input3
hid-generic 0003:046D:C07D.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Gaming Mouse G502] on usb-0000:00:1a.0-1/input0
input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1:1.1/0003:046D:C07D.0002/input/input4
usb 6-2: new low-speed USB device number 2 using uhci_hcd
sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg0 type 5
hid-generic 0003:046D:C07D.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Mouse G502] on usb-0000:00:1a.0-1/input1
ata11: SATA link down (SStatus 0 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
ata18: SATA link down (SStatus 0 SControl 300)
ata20: SATA link up (SStatus FFFFFF93 SControl 300)
ata19: SATA link down (SStatus 0 SControl 300)
ata15: SATA link down (SStatus 0 SControl 300)
ata14: SATA link down (SStatus 0 SControl 300)
ata13: SATA link down (SStatus 0 SControl 300)
ata17: SATA link down (SStatus 0 SControl 300)
ata16: SATA link down (SStatus 0 SControl 300)
ata20.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata20.00: configured for UDMA/66
usb 2-1: New USB device found, idVendor=2109, idProduct=0811
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: 4-Port USB 3.0 Hub
usb 2-1: Manufacturer: VIA Labs, Inc.
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
usb 6-2: New USB device found, idVendor=045e, idProduct=00db
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: Natural® Ergonomic Keyboard 4000
usb 6-2: Manufacturer: Microsoft
input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1a.1/usb6/6-2/6-2:1.0/0003:045E:00DB.0003/input/input5
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
firewire_core 0000:07:07.0: created device fw0: GUID 005a3c44006cf049, S400
ata5.00: ATA-8: SPCC SSD162, 507ABBF0, max UDMA/133
ata5.00: 107463888 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA SPCC SSD162 BBF0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 107463888 512-byte logical blocks: (55.0 GB/51.2 GiB)
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 4:0:0:0: [sda] Attached SCSI disk
microsoft 0003:045E:00DB.0003: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1a.1-2/input0
input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1a.1/usb6/6-2/6-2:1.1/0003:045E:00DB.0004/input/input6
microsoft 0003:045E:00DB.0004: input,hidraw3: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1a.1-2/input1
ata6: SATA link down (SStatus 0 SControl 300)
bcache: bch_journal_replay() journal replay done, 1310 keys in 48 entries, seq 10708661
bcache: register_cache() registered cache device sda5
usb 4-6: New USB device found, idVendor=046d, idProduct=082d
usb 4-6: New USB device strings: Mfr=0, Product=2, SerialNumber=1
usb 4-6: Product: HD Pro Webcam C920
usb 4-6: SerialNumber: 099847EF
clocksource: Switched to clocksource tsc
usb 4-7: new high-speed USB device number 3 using ehci-pci
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.00: ATA-8: HITACHI HTS545025B9A300, PB2ZC61H, max UDMA/100
ata7.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata7.00: configured for UDMA/100
scsi 6:0:0:0: Direct-Access ATA HITACHI HTS54502 C61H PQ: 0 ANSI: 5
sd 6:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI disk
usb 4-7: New USB device found, idVendor=2109, idProduct=0811
usb 4-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 4-7: Product: USB2.0 Hub
hub 4-7:1.0: USB hub found
hub 4-7:1.0: 4 ports detected
usb 4-7.1: new high-speed USB device number 4 using ehci-pci
usb 4-7.1: New USB device found, idVendor=1a40, idProduct=0101
usb 4-7.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 4-7.1: Product: USB 2.0 Hub
hub 4-7.1:1.0: USB hub found
hub 4-7.1:1.0: 4 ports detected
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
ata8.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata8.00: configured for UDMA/133
scsi 7:0:0:0: Direct-Access ATA WDC WD10EADS-00L 1A01 PQ: 0 ANSI: 5
sd 7:0:0:0: Attached scsi generic sg3 type 0
sd 7:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 7:0:0:0: [sdc] Write Protect is off
sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc5 sdc6 sdc7
sd 7:0:0:0: [sdc] Attached SCSI disk
ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata9.00: ATA-8: WDC WD15EARS-00Z5B1, 80.00A80, max UDMA/133
ata9.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata9.00: configured for UDMA/133
scsi 8:0:0:0: Direct-Access ATA WDC WD15EARS-00Z 0A80 PQ: 0 ANSI: 5
sd 8:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 8:0:0:0: Attached scsi generic sg4 type 0
sd 8:0:0:0: [sdd] Write Protect is off
sd 8:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd2
sd 8:0:0:0: [sdd] Attached SCSI disk
random: nonblocking pool is initialized
ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata10.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
ata10.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata10.00: configured for UDMA/133
scsi 9:0:0:0: Direct-Access ATA WDC WD10EADS-00L 1A01 PQ: 0 ANSI: 5
sd 9:0:0:0: Attached scsi generic sg5 type 0
sd 9:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 9:0:0:0: [sde] Write Protect is off
sd 9:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 9:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 19:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
ata20.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6
ata20.00: irq_stat 0x40000001
ata20.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 1 dma 16640 in
Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
ata20: hard resetting link
sde: sde1
sd 9:0:0:0: [sde] Attached SCSI disk
bcache: register_bdev() registered backing device sdc6
bcache: bch_cached_dev_attach() Caching sdc6 as bcache0 on set 411282f2-4d08-4ca2-822f-4e881520790e
floppy0: no floppy controllers found
bcache: register_bdev() registered backing device sdc7
bcache: bch_cached_dev_attach() Caching sdc7 as bcache1 on set 411282f2-4d08-4ca2-822f-4e881520790e
ata20: SATA link up (SStatus FFFFFF93 SControl 300)
ata20.00: configured for UDMA/66
ata20: EH complete
scsi 19:0:0:0: Attached scsi generic sg6 type 3
EXT4-fs (bcache0): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: RTC configured in localtime, applying delta of 300 minutes to system time.
systemd[1]: Failed to insert module 'kdbus': Function not implemented
systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: powerd.service: Cannot add dependency job, ignoring: Unit lxc-android-config.service failed to load: No such file or directory.
systemd[1]: atd.service: Cannot add dependency job, ignoring: Unit atd.service is masked.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Created slice Root Slice.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Listening on udev Control Socket.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Started Braille Device Support.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Mounting Debug File System...
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Started Read required files in advance.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started LVM2 metadata daemon.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started Journal Service.
EXT4-fs (bcache0): re-mounted. Opts: errors=remount-ro
systemd-journald[384]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
EDAC MC: Ver: 3.0.0
EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED)
EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC889: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D2: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D2: inputs:
snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
snd_hda_codec_realtek hdaudioC0D2: dig-in=0x1f
input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
media: Linux media interface: v0.10
Linux video capture interface: v2.00
bcache: register_bcache() error opening /dev/sda5: device already registered
gpio_ich: GPIO from 436 to 511 on gpio_ich
EXT4-fs (sdd2): mounted filesystem with ordered data mode. Opts: (null)
usbcore: registered new interface driver snd-usb-audio
uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d)
input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:1d.7/usb4/4-6/4-6:1.0/input/input15
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
EXT4-fs (bcache1): mounted filesystem with ordered data mode. Opts: (null)
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input19
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
nvidia-nvlink: Nvlink Core is being initialized, major device number 245
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 358.09 Wed Oct 7 19:59:00 PDT 2015
bcache: register_bcache() error opening /dev/sdc6: device already registered
Adding 16776188k swap on /dev/sdc5. Priority:-1 extents:1 across:16776188k FS
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
bcache: register_bcache() error opening /dev/sdc7: device already registered
audit: type=1400 audit(1448001320.064:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=846 comm="apparmor_parser"
audit: type=1400 audit(1448001320.064:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=846 comm="apparmor_parser"
audit: type=1400 audit(1448001320.068:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=846 comm="apparmor_parser"
audit: type=1400 audit(1448001320.068:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=846 comm="apparmor_parser"
audit: type=1400 audit(1448001320.068:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=846 comm="apparmor_parser"
audit: type=1400 audit(1448001320.068:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=846 comm="apparmor_parser"
audit: type=1400 audit(1448001320.068:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=846 comm="apparmor_parser"
audit: type=1400 audit(1448001320.068:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=846 comm="apparmor_parser"
audit: type=1400 audit(1448001320.068:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=846 comm="apparmor_parser"
audit: type=1400 audit(1448001320.080:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=846 comm="apparmor_parser"
cgroup: new mount options do not match the existing superblock, will be ignored
floppy0: no floppy controllers found
work still pending
ip_tables: (C) 2000-2006 Netfilter Core Team
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
vboxdrv: Found 8 processor cores
rfkill: input handler disabled
vboxdrv: TSC mode is Invariant, tentative frequency 2798005640 Hz
vboxdrv: Successfully loaded version 5.0.4_Ubuntu (interface 0x00240000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
r8169 0000:06:00.0 enp6s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
r8169 0000:02:00.0 enp2s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 358.09 Wed Oct 7 19:33:27 PDT 2015
nvidia-modeset: Allocated GPU:0 (GPU-9a668cdf-426a-23a0-1098-2984f709c1f6) @ PCI:0000:01:00.0
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
usb 4-6: reset high-speed USB device number 2 using ehci-pci
usb 4-6: reset high-speed USB device number 2 using ehci-pci
perf interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
NOHZ: local_softirq_pending 282
NOHZ: local_softirq_pending 282
NOHZ: local_softirq_pending 282
NOHZ: local_softirq_pending 282
NOHZ: local_softirq_pending 282
NOHZ: local_softirq_pending 282
NOHZ: local_softirq_pending 282
NOHZ: local_softirq_pending 282
NOHZ: local_softirq_pending 282
NOHZ: local_softirq_pending 282
perf interrupt took too long (8467 > 5000), lowering kernel.perf_event_max_sample_rate to 25000